Epson Stylus Pro 10000 Service Manual

Epson Stylus Pro 10000 Service Manual

This Epson Stylus Pro 10000 Service Manual covered; Provides a general overview and specifications of the product. Describes the theory of electrical and mechanical operations of the product. Provides the step-by-step procedures for the troubleshooting. Describes the step-by-step procedures for disassembling and assembling the product. Epson-approved methods for adjustment. Preventive maintenance procedures and the lists of Epson-approved lubricants and adhesives required for servicing the product. Connector pin assignments. Parts list Electric circuit boards components layout. Exploded diagram. Electrical circuit boards schematics.

The EPSON Stylus Pro 10000 / 10000CF is the quality of image ultra high B0 + supported size large full-size necklace inkjet printer ink applied Epson Photo original mach-Jet technology. The EPSON Stylus Pro 10000 / 10000CF offers the following features main and more. Large format Max. 44 "width of the paper, size B0 + supported." High-speed performance. There is no printing speed of the box in the performance of the main computer to a great extent, to be equipped with the standard card HJFK. High quality. High image quality with 6 ink colors, 1440X720dpi and minimum 5pl layers different. High picture quality and colour reproduction at the same level as Stylus Photo 1200 / Stylus Color 5500. Low cost of operation, independent of each colour and large capacity 500 ml. handling of multiple documents ink cartridge, support of various media. All brackets are compatible with Stylus Pro 9000 and Stylus Pro9500. Paper supports of double roll automatic roll, manual cutter autoloading (cut sheet) paper cutter.

The paper should not have wrinkles, tears or creases and the surface must be smooth. The force to remove the end of the paper roll core must be between 300gf and 2000gf. If you are using a core of 3 ", an exclusive option of the product is required (paper roll spindle 3"). " It is used under normal conditions (temperature 15 ° C ~ 25 ° C, humidity 40% ~ 60% HR) the paper roll can be printed until the paper out of the nucleus. Reference: Length of paper remaining when roll paper exit the core 40 cm approx. (TBD) to the upper core, 30 cm approx. (TBD) to lower core 2 "core may be 2 rolls at the same time 3" core cannot be 2 rolls at the same time. (A roll of 2-core "and a roll of 3-core" can be adjusted at the same time.).

When storing the printer, make sure that the print heads are in the home (capping) position. If necessary, turn on, wait for the print heads move to the starting position, and then turn off. Before transporting the printer, remove the ink cartridges and turn the screws of the ink valves to the closed position. Also make sure that the print heads are in the home, capping, the position. After transporting the printer, install new ink cartridges. If the temperature drops below - 15 ° C (5 ° F), ink cartridges and printheads freezes. Ink thaws completely after three hours at 25 ° C (77 ° F).

Download Epson Stylus Pro 10000 Service Manual

Tweet