Kyocera FS-9130DN FS-9530DN Service Manual

This Kyocera FS-9130DN FS-9530DN Service Manual provides safety warnings and precautions for our staff to ensure the safety of its customers, its machines as well as themselves during maintenance activities. You are advised to service personnel read this booklet carefully to familiarize yourself with the warnings and cautions described here before carrying out maintenance activities. Various symbols are used to protect our customers against the physical danger and service staff and to prevent damage to your property. These symbols are described below: danger: risk of serious bodily injury or death can result from insufficient attention or the incorrect implementation of warning messages using this symbol. Warning: serious bodily injury or death due to insufficient attention or can cause incorrect observance of warning messages that use this symbol. Caution: Personal injury or property damage can result from insufficient attention or incorrect implementation of the warning messages that use this symbol.

Installation precautions; Do not use a power supply with a voltage other than specified. Avoid multiple connections to an electrical outlet: may cause the fire or electric shock. When using an extension cord, make sure that it is suitable for the rated current. Connect the ground wire to a suitable earthing point. Failure to ground the copier may cause a fire or an electric shock. The connection of the ground wire to an object that is not approved for this purpose can cause an explosion or an electric shock. Never connect the ground wire to either of the following: gas pipes, lightning rods, ground wires for telephone lines and water pipes or faucets not approved by the competent authorities.

Do not place the copier on an infirm or angled surface: the copier may tip over, causing injury. Do not install the copier in a humid or dusty place. This may cause the fire or electric shock. Do not install the copier near a radiator, heater, other heat source or near flammable material. This may cause the fire. Allow sufficient space around the copier to allow the ventilation grills to keep the machine as cool as possible. Insufficient ventilation may cause heat buildup and poor copying performance. Always handle the machine by the correct locations when moving it. Always use anti-toppling and locking devices on copiers so equipped. Failure to do this may cause the copier to move unexpectedly or topple, leading to injury. Avoid inhaling toner or developer excessively. Protect the eyes. If toner or developer is the accident- tally ingested, drink a lot of water to dilute it in the stomach and obtain medical attention immediately. If it gets into the eyes, rinse immediately with copious amounts of water and obtain medical attention. Advice customers that they must always follow the safety warnings and precautions in the copier’s instruction handbook.

Download Kyocera FS-9130DN FS-9530DN Service Manual

Tweet